August 28, 2025·Industrial

Dumpster for Metal Scrap Disposal in Orlando, FL

Metal scrap from construction sites, renovation projects, manufacturing, and property cleanouts needs heavy-duty disposal. Dumpster Strong provides reinforced roll-off containers for metal scrap disposal across Orlando and Central Florida, with weight allowances designed for heavy materials.

Metal Types We Accept

Our dumpsters accept steel beams and framing, aluminum siding and gutters, cast iron pipes and fixtures, copper piping (though recycling may be more valuable), tin and sheet metal, metal roofing panels, rebar and wire mesh, metal fencing and gates, and old appliances and equipment frames. Metal is heavy, keep weight limits in mind when loading. Our 20-yard dumpster with 3-ton allowance can hold significant amounts of mixed metal scrap.

Weight Considerations for Metal

Metal is one of the heaviest materials we haul. A 20-yard dumpster half-filled with metal scrap can easily reach its 3-ton weight limit. For large metal disposal projects, consider our 30-yard with 4 tons or 40-yard with 5 tons included. If you're disposing of exclusively metal, call us to discuss appropriate weight allowances for your project.

Scrap Value vs. Dumpster Convenience: A Real Decision Tree

If your load is more than 200 lbs of clean copper, aluminum, or brass - drive it to a scrap yard first and pocket the cash. If it's mixed steel and iron under 1,000 lbs - dumpster wins on convenience (scrap yards pay $0.05-$0.10/lb on mixed steel, barely worth the trip). If it's appliances - either route works; some scrap yards pay $5-$15 per appliance for the steel content. Orlando-area scrap buyers include Trademark Metals (Sanford), Pull-A-Part (Orlando), and Mid-Florida Metals (Apopka).

Refrigerant Removal Before Appliance Disposal

EPA Section 608 of the Clean Air Act prohibits venting refrigerants (R-22, R-410A, R-134a) to the atmosphere. Refrigerators, freezers, AC units, and dehumidifiers must have refrigerant recovered by an EPA Section 608-certified technician BEFORE disposal. Most HVAC contractors recover for $40-$75 per unit and provide an EPA-compliant tag. Untagged appliances are rejected at most landfills and result in $250-$500 rejection fees. Trade-in programs at Lowe's and Home Depot include recovery if you're replacing.

Rebar, Wire Mesh, and Sharp-Edge Loading

Cut rebar to 4-foot maximum lengths to avoid puncturing the container floor or piercing tires during haul. Roll wire mesh into bundles rather than loading flat - flat sheets snag everything else and slice loading workers. Sheet metal with sharp edges should be sandwiched between flat scraps to prevent injuries. Loading workers should wear cut-resistant gloves (ANSI A4 minimum) and steel-toed boots throughout the project.

Book Your Metal Scrap Dumpster

Heavy-duty disposal for Orlando's toughest materials. Book your dumpster online, see real-time pricing by ZIP, and save $25 with code STRONG25.

Schedule Your Commercial Dumpster

30 and 40 yard containers for warehouses, factories and large facilities. Multi-haul scheduling available. See pricing online.

BOOK & SAVE $25

Frequently Asked Questions

Can I put old appliances in a dumpster for metal recycling?▾

Yes, old appliances like refrigerators (with freon removed), washers, dryers, and stoves are accepted.

Is metal scrap heavy for dumpster weight limits?▾

Yes, metal is very heavy. A half-full 20-yard of metal can reach the 3-ton limit. Choose a larger size with higher weight allowance for metal-heavy loads.

Should I recycle valuable metal instead?▾

For large quantities of copper, brass, or aluminum, a scrap yard may pay for the material. For mixed or low-value metal, a dumpster is more convenient.

Do I really need to remove refrigerant before tossing an appliance?▾

Yes - EPA Section 608 makes it illegal to dispose of refrigerant-containing appliances without certified refrigerant recovery. Most landfills reject untagged units and charge $250-$500 rejection fees. Any HVAC contractor can recover and tag for $40-$75.

How long should rebar be cut for safe loading?▾

Cut to 4 feet maximum. Longer pieces puncture container floors and can pierce truck tires during haul, which voids weight limit refunds and may incur damage fees.

Where can I sell valuable scrap metal in Orlando?▾

Trademark Metals in Sanford, Pull-A-Part on John Young Pkwy, and Mid-Florida Metals in Apopka all buy from drop-in customers. Bring ID - Florida law requires it for scrap transactions.